McElroy T618

The McElroy T618 is a world-class butt welding machine designed to bridge the gap between small and large diameter pipe fusion. This unit is designed to weld HDPE pipe sizes from 160mm to 450mm (6″ IPS to 18″ OD). It is ideal for medium to large infrastructure projects. The T618 is a self-contained butt welding machine. It has an on-board generator and a strong hydraulic system. This allows it to work without external power sources in remote areas of Australia.

Mobility is key to this butt welding machine. It is mounted on a strong crawler track system. This system can easily move through mud, sand, and steep hills. The machine has a flexible 4-jaw carriage that can be taken off for in-trench work. This makes it a very adaptable butt welding machine for complex pipeline layouts. The T618 works well with the McElroy DataLogger. It documents every joint with GPS and pressure data. This gives contractors the quality assurance they need for important water, gas, and mining projects.

• Redesigned Based on Feedback: Shares a common vehicle with the 28, 250, and 412 TracStars.
• Diesel Engine: Suitable for job-sites where gasoline is not permitted.
• Fusion Range: Butt fuses pipe sizes from 6” IPS to 18” OD (180mm to 450mm).
• Self-Contained and Self-Propelled: Track-mounted vehicle handles grades up to 30 percent.
• Enhanced Maintenance Access: New cowling design aids in heat dissipation.
• Improved Electrical System: Increases circuit protection with a standard battery disconnect for easy lockout.
• Interchangeable 4-Jaw Carriage: Easily removable for in-ditch fusions, can convert to a 3-jaw carriage for tight installations.
• Automated Version Available: Guides the operator through fusing steps with automated control over heat, soak, fuse, and cool cycles.